MAP052WR

Alum. alloy Front Lower Wishbone Set (MA-020, Wide, Red)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP052WU

Alum. alloy Front Lower Wishbone Set (MA-020, Wide, Gunmetal)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP053-1

Fittings for Front Lower Wishbone Set (MA-020,030/F)

Fit to: MAP052??, MAP053??

USD 3.0USD 4.5(In Stock)

MAP053-2

Shaft Pin for Front Lower Wishbone Set (MA-020,030/F)

Fit to: MAP052??, MAP053??

USD 2.0USD 2.6(In Stock)

MAP009HN

AL7075 HD Hard Coated Universal Shaft / CVD (Narrow, 1 pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(Low Stock)

MAP009HW

AL7075 HD Hard Coated Universal Shaft / CVD (Wide, 1pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(In Stock)

MAP009H-OP1

User-customize Outer Race for HD Hard Coated Universal Shaft / CVD (1pair)

Fit to: MAP009H?

3mm Outer Race --- 1 pair.
Allows user to make diameter that is fitting to various brands of bearings.

USD 10.0USD 15.0(In Stock)

MAU1044C

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Cyan)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

USD 15.6USD 24.8(Low Stock)

MAU1044R

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Red)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

USD 15.6USD 24.8(In Stock)

MAU1044U

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Gunmetal)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

USD 15.6USD 24.8(Out of Stock)

MAU105C

Alum. alloy Rear Hub (For DWS, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 13.4USD 20.8(In Stock)

MAU105R

Alum. alloy Rear Hub (For DWS, Red)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 13.4USD 20.8(In Stock)