MAP00410C

Alum. alloy Front Knuckle (1 degree camber, Cyan)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00410R

Alum. alloy Front Knuckle (1 degree camber, Red)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00410U

Alum. alloy Front Knuckle (1 degree camber, Gunmetal)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00420C

Alum. alloy Front Knuckle (2 degree camber, Cyan)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00420R

Alum. alloy Front Knuckle (2 degree camber, Red)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00420U

Alum. alloy Front Knuckle (2 degree camber, Gunmetal)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP004-1

Fittings for Front Knuckle (MA-020,030/F)

Fit to: MAP004???

USD 2.3USD 3.5(In Stock)

SH-003

Alum. alloy Shim Set 3×4(TH0.5/1.0)mm

ID3×OD4×TH0.5(mm) --- 5pcs
ID3×OD4×TH1.0(mm) --- 5pcs

USD 5.0(In Stock)

MAP053NC

Alum. alloy Front Lower Wishbone Set (MA-030/F, Narrow, Cyan)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP053NR

Alum. alloy Front Lower Wishbone Set (MA-030/F, Narrow, Red)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP053NU

Alum. alloy Front Lower Wishbone Set (MA-030/F, Narrow, Gunmetal)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP053WC

Alum. alloy Front Lower Wishbone Set (MA-030/F, Wide, Cyan)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)