MAP004-1

Fittings for Front Knuckle (MA-020,030/F)

Fit to: MAP004???

USD 2.3USD 3.5(In Stock)

SH-003

Alum. alloy Shim Set 3×4(TH0.5/1.0)mm

ID3×OD4×TH0.5(mm) --- 5pcs
ID3×OD4×TH1.0(mm) --- 5pcs

USD 5.0(In Stock)

MAP009HN

AL7075 HD Hard Coated Universal Shaft / CVD (Narrow, 1 pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(In Stock)

MAP009HW

AL7075 HD Hard Coated Universal Shaft / CVD (Wide, 1pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(In Stock)

MAP009H-OP1

User-customize Outer Race for HD Hard Coated Universal Shaft / CVD (1pair)

Fit to: MAP009H?

3mm Outer Race --- 1 pair.
Allows user to make diameter that is fitting to various brands of bearings.

USD 10.0USD 15.0(In Stock)

MAU1044C

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Cyan)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

USD 15.6USD 24.8(Low Stock)

MAU1044R

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Red)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

USD 15.6USD 24.8(In Stock)

MAU1044U

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Gunmetal)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

USD 15.6USD 24.8(Out of Stock)

MAU105C

Alum. alloy Rear Hub (For DWS, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 15.6USD 20.8(In Stock)

MAU105R

Alum. alloy Rear Hub (For DWS, Red)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 15.6USD 20.8(In Stock)

MAU105U

Alum. alloy Rear Hub (For DWS, Gunmetal)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 15.6USD 20.8(In Stock)

MAU106NC

Alum. alloy Rear Lower Arm (For DWS, Narrow, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub...

USD 21.9USD 33.7(In Stock)